Cleaning The Print Heads - Roland SC-545EX Print&Cut User Manual

5-1 Cleaning the Print heads

Switching on the sub power automatically performs maintenance operations, including cleaning of the print head. This
means that there is normally no need to perform cleaning otherwise. If drop-out occurs with printed images, clean the
print head.
Cleaning the Print heads
Load media for printing-test use.
1
Press the [CLEANING] key, and press the [
2
key to select the printing-head group to clean.
Press the [ENTER] key to start head cleaning.
Also, holding down the [CLEANING] key for at
least one second starts head cleaning for all
heads.
Printing-head Groups
A Group : Cyan, Magenta
B Group : Yellow, Black
C Group : Light magenta, Light cyan
After head cleaning has ended, holding down
3
the [TEST PRINT] key for one second or longer
starts a printing test.
Refer to "2-4 Printing" and see "Performing a
4
Printing Test" and check the printing-test results.
If a problem is found, repeat the cleaning.
Chapter 5: Maintenance
84
] HEAD CLEANING
A GROUP
ENTER