Avaya J169 Installing And Administering page 114

Administering your phone
Parameter name
GUESTWARNING
HEADSYS
HEADSTAT
HEADSETBIDIR
HOLDSTAT
HOOKSTAT
HTTPDIR
May 2018
Default value Description and value range
5 Guest login warning in minutes to indicate when to notify
the user that GUESTLOGINDURATION will expire. One
or two ASCII numeric digits. Valid values are 1 through
15.
0 if Headset operational mode. Specifies whether the
CALLCTRSTA deskphone will go on-hook if the headset is active when a
T =0, else 1 Disconnect message is received. One ASCII numeric
digit. Valid values are:
0 or 2 = The deskphone will go on-hook if a Disconnect
message is received when the headset is active.
1 or 3 = Enabled, Disconnect messages are ignored
when the headset is active.
0 Specifies whether the Headset button is enabled or
disabled when CCBTNSTAT is 0. The value is gnored by
the deskphones that do not have a Headset button. Valid
values are:
• 0: The Headset button is disabled when CCBTNSTAT is
• 1: The Headset button is enabled.
0 Specifies the permission flag for enabling or disabling the
Headset Bi-directional functionality. Valid values are:
0= Default, Bi-directional functionality disabled, 1=
Switchhook and Alerting, 2= Switchhook only.
0 Specifies whether the Hold button is enabled or disabled
when CCBTNSTAT is 0. Valid values are:
• 0: The Hold button is disabled when CCBTNSTAT is 0.
• 1: The Hold button is enabled.
0 Specifies whether the switchhook is enabled or disabled
when CCBTNSTAT is 0. Valid values are:
• 0: The switchhook is disabled when CCBTNSTAT is 0.
• 1: The switchhook is enabled.
" " (Null) HTTP server directory path. The path name prepended to
all file names used in HTTP GET operations during
initialization. Value: 0-127 ASCII characters, no spaces.
Installing and Administering Avaya J169/J179 IP Phone H.323
Comments on this document? infodev@avaya.com
0.
Note:
This parameter applies only if the user has not
changed the Call Settings from the deskphone
menu. The changes made by the user are stored in
the backup/restore file. User can use the Clear
operation to reset the configuration.
Table continues...
114