Avaya J169 Installing And Administering page 20

Initial setup and connectivity
No. Task
Requirements for your network
1 Your call server must haveAvaya Aura
Manager Release 6.2 or later version installed.
Avaya only supports running on Communication
Manager 6.2 or later.
2 Verify that you have installed the following circuit packs
on the switch:
• TN2602 or TN2302IP Media Processor circuit pack.
Avaya recommends that sites with a TN2302 IP
Media Processor circuit pack must install a TN2602
circuit pack to benefit from increased capacity.
• TN799C or D Control-LAN (C-LAN) circuit pack.
Important:
Release 6.0 or later requires TN799C V3 or
greater C-LAN circuit pack(s).
3 Verify that you have configured the Avaya call server
correctly.
4 Verify that you have administered the DHCP server
and application correctly.
5 Verify that you have administered the HTTP/HTTPS
server and application correctly.
6 Verify that you have loaded the upgrade script and
application files correctly on the HTTP or HTTPS
server.
7 If applicable, administer the DNS server.
Note:
All server applications, such as DHCP and DNS, can co-reside on the same hardware subject
to the specific restrictions of each individual application.
No. Task
Requirements for each phone
1 Verify that you have an extension number
and an Communication Manager security
code (password) for each applicable IP
phone. If your call server and the phone
settings file support unnamed registration,
you do not need an extension or password.
However, without an extension or
May 2018
®
Communication
Installing and Administering Avaya J169/J179 IP Phone H.323
Comments on this document? infodev@avaya.com
Notes
-
-
-
-
-
-
-
Notes
About unnamed
registration on
page 28
20