Avaya J169 Installing And Administering page 144

H.323
Hide thumbs Also See for J169:
Table of Contents

Advertisement

Administering your phone
System Parameter
Name
L2Q, L2QVLAN,
L2QAUD, L2QSIG,
DSCPAUD,
DSCPSIG
MCIPADD
TLSSRVR and
HTTPSRVR
L2Q
May 2018
TLV Name
Impact
If the TLV VLAN ID matches the VLAN ID the phone is
using, the VLAN ID is marked as set by LLDP. Otherwise,
if already registered, the phone waits until there are no
active calls, releases its IP Address, turns on tagging with
the TLV VLAN ID, sets L2Q to on changes the default L2Q
to on and resets. If there is no valid IP Address, the phone
immediately starts tagging with the new VLAN ID without
resetting.
MED Network Policy
L2Q - set to 2 (off) If T (the Tagged Flag) is set to 0; set to
TLV
1 (on) if T is set to 1.
L2QVLAN - set to the VLAN ID in the TLV.
L2QAUD and L2QSIG - set to the Layer 2 Priority value in
the TLV.
DSCPAUD and DSCPSIG - set to the DSCP value in the
TLV.
The system checks whether a reset is necessary to obtain
a new IP address due to a change in the values of the
parameters L2Q or L2QVLAN. This TLV is ignored if:
• the value of USE_DHCP is 0 and the value of IPADD is
• the Application Type is not 1 (Voice), or
• the Unknown Policy Flag (U) is set to 1.
Proprietary Call
MCIPADD will be set to this value if it has not already
Server TLV
been set.
Proprietary File
TLSSRVR and HTTPSRVR will be set to this value if
Server TLV
neither of them have already been set.
Proprietary 802.1 Q
The default L2Q is set to the value of this TLV. No change
Framing
is made to the current L2 tagging, but the new default
value is used on the next reboot.
• If the 802.1Q Framing value is 1, L2Q will be set to "1"
• If the 802.1Q Framing value is 2, L2Q will be set to "2"
• If the 802.1Q Framing value is 3, L2Q will be set to "0"
Proprietary - PoE
This proprietary TLV can initiate a power conservation
Conservation TLV
mode. The phones that support this will turn the phone
backlight and the backlight of an attached Button Module
on or off in response to this TLV.
Installing and Administering Avaya J169/J179 IP Phone H.323
Comments on this document? infodev@avaya.com
not 0.0.0.0, or
(on)
(off)
(auto)
Table continues...
144

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

J179

Table of Contents