Avaya J169 Installing And Administering page 89

Parameter
PHY1STAT
PHY2STAT
PROCPSWD
PROCSTAT
REREGISTER
REUSETIME
SIG
SNMPADD
SNMPSTRING
STATIC
TLSDIR
TLSPORT
TLSSRVR
UNNAMEDSTAT
VLANTEST
These parameters are saved in the non-volatile memory of the IP Deskphones. If the DHCP
server is not available for any reason during phone restart or reboot, the phone uses these saved
parameters.
Related links
Setting up the DHCP server
May 2018
Description
Controls the Ethernet line interface speed. The default is 1 which indicates that it
is auto-negotiate.
Controls the secondary Ethernet interface speed. The default is 1 which indicates
that it is auto-negotiate.
Security string used to access local procedures. The default is 27238 (CRAFT).
Controls whether local Craft procedures are allowed. The default is 0 which
indicates that access to all administrative options is allowed.
The number of minutes the phone waits before and between re-registration
attempts.
The n umber of seconds to wait for successful completion of DHCP before reusing
previous parameters on the default (port) VLAN. The default is 60.
The signaling protocol download flag that indicates which protocol applies (H.323
(1), SIP, (2) or Default (0). For software releases prior to 6.0, SIG can only be set
manually on the deskphone and not through DHCP or in the 46xxsettings.txt file.
Default means the default protocol supported at that location. A custom upgrade
file is required to support both protocols. For software releases 6.0 and later,
separate upgrade files with different names are used for H.323 and SIP, and
Default means to download the upgrade file for the same protocol that is
supported by the software that the deskphone is currently using.
Allowable source IP addresses for SNMP queries. The default is " " (Null).
SNMP community name string. The default is " " (Null).
Controls whether to use a manually-programmed file server or CM IP address
instead of those received through DHCP or a settings file. If a manually
programmed file server IP address is to be used, STATIC must be set through
DHCP.
Specifies the path name prepended to all file names used in HTTPS GET
operations during startup.
Specifies the TCP port number for HTTPS file downloading.
Specifies the IP addresses or DNS names of Avaya file servers to download
configuration files.
Specifies that Transport Layer Security is used to authenticate the server.
Specifies whether the deskphone will attempt unnamed registration.
Controls the length of time the deskphone tries DHCP with a non-zero VLAN ID.
When the interval is exceeded, the deskphone records the VLAN ID so that the
VLAN ID is not used again, and DHCP continues on the default VLAN. The default
is 60 seconds.
on page 84
Installing and Administering Avaya J169/J179 IP Phone H.323
Comments on this document? infodev@avaya.com
Server Administration
89