Administering Display Language Options - Avaya J169 Installing And Administering

Administering your phone
• Test - To run a self test on the phone.
• VIEW - Review system parameters to verify the current parameter values and file versions.
• VPN - Administer VPN settings.
Note:
If you have not changed the default password, the Debug option is available in a Read-Only
mode.
You can use the DEBUG option only if you change the default password to the Craft local
procedures through the PROCPSWD parameter.
The new value of the PROCPSWD parameter must be 4 to 7 numeric digits, "0000" through
"9999999". However, if value of PROCPSWD is less than 4 digits after you install Release
6.2.4 or later, the value will be changed back to the default value of 27238.

Administering display language options

By default, the phone displays information in the English language.
All software downloads include language files for 19 languages.
Administrators can specify from one to four languages for each phone to replace English. Users
can then select the language in which the phone displays messages.
All downloadable language files contain all information needed for the phone to present the
language as part of the user interface.
Use the configuration file and the following parameters to customize the settings for up to four
languages:
• LANGxFILE - The name of a selected language file, for example, French. In addition to
providing the language name as this value, replace the x in this parameter with a 1, 2, 3, or 4
to indicate which of the four languages you are specifying. For example, to indicate that
German and French are the available languages, the setting is:
LANG1FILE=mlf_german.txt and LANG2FILE=mlf_french.txt.
• LANG0STAT - Use this parameter to select the built-in English language when other
languages are downloaded. If LANG0STAT is 0 and at least one language is downloaded,
you cannot select the built-in English language. If LANG0STAT is 1 then you can select the
built-in English language text strings.
• LANGSYS - The file name of the system default language file, if any.
• LANGLARGEFONT- The name of the language file you want for a "large font" display,
currently only"English."
A large text font is available on all deskphones. You can activate the larger text font only if a
language file for this font is available. The Text Size option is presented to the user if the
parameter LANGLARGEFONT is not null and if a language file for that value is used as the
current user interface language. If neither condition is met, the Text Size option is not available to
the user.
May 2018 Installing and Administering Avaya J169/J179 IP Phone H.323
Comments on this document? infodev@avaya.com
146