Avaya J169 Installing And Administering page 66

Administering your phone
Destination port
The number used in the Source
Port field of RAS packets that are
sent by the phone
The next higher port number if the
port used for RTP is even, or the
next lower port number if the port
used for RTP is odd
The number used in the Source
Port field of registration messages
that are sent by the SLA agent on
the phone
Any
Note:
CNA is not supported in Release 6.2 and later. SLA is supported in Release 6.4 and later.
Table 4: Transmitted packets (Source = IP phones)
Destination Port
7
The number used in the Source
Port field of packets that are
received by the SSH server of the
phone.
53
67
HTTPPORT
80 unless explicitly specified
otherwise, for example, in a URL
or because of use of WMLPORT
May 2018
Source port
1719
Any
Any
1300
Source Port
Any unused port
number
22
Any unused port
number
68
Any unused port
number
Any unused port
number
Installing and Administering Avaya J169/J179 IP Phone H.323
Comments on this document? infodev@avaya.com
Use
H.323 RAS messages
Received RTCP and SRTCP
packets
Received SLA registration
messages
H.323 signaling messages in
TLS_TTS mode re-registration.
Port 1300 is closed when using
non TTS method to connect to
the gatekeeper or when H.323
signaling is not over TLS. When
the port is open, the phone does
not respond to incoming
packets to this port from IP
addresses that are not in the
gatekeeper list.
Use
Transmitted Qtest messages
Packets that are transmitted by
the SSH server of the phone
Transmitted DNS messages
Transmitted DHCP messages
Packets that the HTTP client
transmits on the phone during
startup
Packets that the HTTP client of
the phone transmits after
UDP or TCP?
UDP
UDP
TCP
TCP
UDP or TCP?
UDP
TCP
UDP
UDP
TCP
TCP
Table continues...
66