Perform Engine Maintenance - Deutz 1011F Models; Check The Exhaust System - Genie GS-3390 Service Manual

Section 3 • Scheduled Maintenance Procedures
CHECKLIST B PROCEDURES
B-3
Perform Engine Maintenance -
Deutz 1011F Models
Engine specifications require that this procedure
be performed every 250 hours or quarterly,
whichever comes first.
Required maintenance procedures and additional
engine information is available in the Deutz 1011F
Operation Manual (Deutz part number 0297 9683).
Deutz 1011F Operation Manual
Genie part number
3 - 16
B-4

Check the Exhaust System

Genie requires that this procedure be performed
every 250 hours or quarterly, whichever comes
first.
Maintaining the exhaust system is essential to
good engine performance and service life. Running
the engine with a damaged or leaking exhaust
system can cause component damage and unsafe
operating conditions.
52883
1 Release the latches on the engine tray and fully
slide the engine tray out.
2 Insert a 6 inch / 15 cm screwdriver or rod into
the engine tray lock hole located near the
engine tray roller wheels to prevent the engine
tray from moving.
3 Be sure that all fasteners are tight.
4 Inspect all welds for cracks.
5 Inspect for exhaust leaks; i.e., carbon buildup
around seams and joints.
GS-3390 • GS-4390 • GS-5390
Bodily injury hazard. Do not
inspect while the engine is
running. Remove the key to
secure from operation.
Bodily injury hazard. Beware of
hot engine components. Contact
with hot engine components may
cause severe burns.
Part No. 72863
July 2007
REV G