Replace The Engine Air Filter Element - Ford Models; Perform Engine Maintenance - Ford Models - Genie GS-3390 Service Manual

Section 3 • Scheduled Maintenance Procedures
CHECKLIST B PROCEDURES
B-19
Replace the Engine Air Filter
Element - Ford Models
Engine specifications require that this procedure
be performed every 400 hours or semi-annually,
whichever comes first.
Maintaining the engine air filter in good condition is
essential to good engine performance and service
life. Failure to perform this procedure can lead to
poor engine performance and component damage.
Note: Perform this procedure with the engine off.
1 Release the latches on the engine tray and fully
slide the engine tray out.
2 Insert a 6 inch / 15 cm screwdriver or rod into
the engine tray lock hole located near the
engine tray roller wheels to prevent the engine
tray from moving.
3 Remove the retaining ring from the end cap of
the air filter canister.
4 Remove the end cap from the air cleaner
canister.
5 Remove the air filter retaining fastener. Remove
the air filter element.
6 Clean the inside of the canister and the gasket
with a damp cloth.
7 Install the new filter element.
8 Install the air filter canister end cap and the end
cap retaining ring.
3 - 28
B-20
Perform Engine Maintenance -
Ford Models
Engine specifications require that this procedure
be performed every 400 hours or semi-annually,
whichever comes first.
Required maintenance procedures and additional
engine information is available in the
Ford LRG425 Operator Handbook
(Ford part number FPP 194-302).
Ford LRG 425 Operator Handbook
Genie part number
GS-3390 • GS-4390 • GS-5390
July 2007
REV G
84792
Part No. 72863