Contacting Juniper Networks - Juniper PTX10003-160C Quick Start Manual

Do not open or remove chassis covers or sheet-metal parts unless instructions are provided in the hardware documentation
for this device. Such an action could cause severe electrical shock.
Do not push or force any objects through any opening in the chassis frame. Such an action could result in electrical shock or
fire.
Avoid spilling liquid onto the chassis or onto any device component. Such an action could cause electrical shock or damage
the device.
Avoid touching uninsulated electrical wires or terminals that have not been disconnected from their power source. Such an
action could cause electrical shock.
Some parts of the chassis, including AC and DC power supply surfaces, power supply unit handles, SFB card handles, and fan
tray handles might become hot. The following label provides the warning of the hot surfaces on the chassis:
Always ensure that all modules, power supplies, and cover panels are fully inserted and that the installation screws are fully
tightened.
Power Cable Warning (Japanese)
WARNING: The attached power cable is only for this product. Do not use this cable for another product.

Contacting Juniper Networks

For technical support, see:
Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in the United States and other countries.
All other trademarks, service marks, registered marks, or registered service marks are the property of their respective owners. Juniper Networks assumes no
responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication
without notice. Copyright © 2019 Juniper Networks, Inc. All rights reserved. Rev. 01, May 2019.
https://www.juniper.net/support/requesting-support.html
PTX10003-80C and PTX10003-160C Quick Start Guide
.