Have two people grasp both sides of the PTX10003, lift it, and position it in the rack so that the front brackets on the
front-mounting rails are aligned with the rack holes.
Continue to support the PTX10003 while sliding the rear-mounting blades into the channel of the side-mounting rails. See
6.
Figure 4
and
Figure
5.
Figure 4: Securing the Side Rails (PTX10003-160C)
Figure 5: Securing the Side Rails ( PTX10003-80C)
Ensure that the PTX10003 chassis is level by verifying that all the screws on the front of the rack are aligned with the screws
7.
at the back of the rack. See
Figure 6: PTX10003 Secured in Rack (PTX10003-160C)
Copyright © 2018, Juniper Networks, Inc.
Figure 6
and
Figure
7.
PTX10003-80C and PTX10003-160C Quick Start Guide
5