Table of Contents
Advertisement
PTX10003-80C and PTX10003-160C Quick Start Guide
Wrap and fasten one end of the ESD wrist strap around your bare wrist, and connect the other end of the strap to the ESD
1.
point on the device.
Ensure that the power supplies are fully inserted in the chassis and the latches are secure.
2.
Locate the power cords shipped with the PTX10003; the cords have plugs appropriate for your geographical location. See
3.
PTX10003 Power System.
Insert the coupler end of the power cord into the AC/HVDC power cord inlet on the AC/HVDC power supply faceplate (see
4.
Figure 10
and
Figure
11).
NOTE:
The coupler end of the power cord model is APP-400.
Figure 10: Connecting the AC/HVDC Power Cord (PTX10003-160C)
Figure 11: Connecting an AC/HVDC Power Cord (PTX10003-80C)
If the AC/HVDC power source outlet has a power switch, set it to the off (
5.
NOTE:
The PTX10003 powers on as soon as power is provided to the power supply. There is no power switch on
the router.
Insert the power cord plug into an AC/HVDC power source outlet.
6.
8
O
) position.
Copyright © 2018, Juniper Networks, Inc.
Advertisement
Table of Contents
