2.10 Labels
The following labels, especially the warning ones, are attached to the locations where specific dangers may occur.
Be sure to comply with description and warnings of the labels when operating to keep the manipulator safely. Do
not tear, damage, or remove the labels. Be very careful if you need to handle the parts where the labels are
attached.
A
B
C
D
C
Medium & Heavy Payload Series-Hardware Installation Manual TM12/14 Series
Do not put your hand or fingers close to the moving parts
Be careful not to be close to the moving parts and nearby areas
to avoid collision
Do not touch any internal electric parts to avoid electric shock
Product label
Table 3: Denotation of Labels
B A
Figure 3: Locations of Labels
C
D
14