If the data in ROM is corrupt
Sometimes the data in the FLASH ROM can be corrupt. This can be caused
while programming of the FLASH ROM if one of the following things happens:
•
A system fault
•
A loss of power to the HP E3472A/73A Emulator or host computer
•
A break in the communications channel
If this happens, try the following steps:
Cycle power on the HP E3472A/73A Emulator and try the flash
1
programming utility (progflash) again.
If this doesn't work, continue with the next step:
Set switch S4 to OPEN, then cycle power.
2
This will force the HP E3472A/73A Emulator to use only the boot ROM. Try
running the programming utility again. If this is successful, return the
switches to their normal configuration (S3 and S4 CLOSED) and cycle power.
Solving Problems
If the data in ROM is corrupt
115