Table of Contents
Advertisement
Specifications and Characteristics
Electrical Specifications
Electrical Specifications
BNC, labeled TRIGGER OUT
Output
Drive Logic high level >= 2.0 V when occurring monitor
program with 50-ohm load or when in reset. Logic low level <= 0.4 V
when running user code with 50-ohm load.
BNC, labeled TRIGGER IN
Input Edge-triggered TTL level input (positive high), 20 pf, with 2K
ohms to ground in parallel. Maximum input: 5 V above V
5 V below
CC;
ground.
Communications
Seria l Port 9-pin female type "D" subminiature connector. RS-232
DCE to 115.2 kbaud.
10BASE-T LAN Port RJ-45 connector. IEEE 802.3 10BASE-T
(StarLAN).
10BASE2 LAN Port 50-ohm BNC connector. IEEE 802.3 10BASE2
(ThinLAN). When using this connector, the HP E3472A/73A Emulator
provides the functional equivalent of a Medium Attachment Unit (MAU)
for ThinLAN.
Power Supply
Input 100-240Vac, 1.0Amax, 50/60Hz.
Output 12Vdc, 3.3A
79
Advertisement
Table of Contents
