To Connect A Serial Cable - HP E3473A User Manual

Connecting to the Host Computer

To connect a serial cable

To connect a serial cable
Connect an RS-232C modem cable from the host computer to the
HP E3472A/73A Emulator. The recommended cable is HP part number
C2932A. This is a 9-pin cable with one-to-one pin connections.
Use the recommended cable. If the cable is not shielded, or if the cable is not
C a u t i o n
grounded at the serial controller, the HP E3472A/73A Emulator may be
damaged by electrostatic discharge.
36