Table of Contents
Advertisement
Connecting to the Host Computer
To configure LAN parameters using "ipconfig700"
Example
If the link-level address on your HP E3472A/73A Emulator read
08000F090F30, and your system administrator gave you the IP address
192.35.12.6, you could enter the following command:
$ ipconfig700 -l 08000F090B30 -i 192.35.12.6 <RETURN>
Because no gateway address was entered, this value would default to 0.0.0.0.
When the IP address is successfully programmed, ipconfig700 will display the
HP E3472A/73A Emulator version information.
Limitations of ipconfig700
The ipconfig700 command generally will not work if:
• the workstation and the HP E3472A/73A Emulator are on different subnets
OR
• a BOOTP daemon running elsewhere on your network is configured to
respond to the link-level address of the HP E3472A/73A Emulator.
28
Advertisement
Table of Contents
