Table of Contents
Advertisement
3 The SpeedTouch™610 Web Interface
58
4
The Add Port Mapping window appears.
If you want to:
•
Enter a port mapping for a specific application, click the Basic tab. Select an
application in the Application list and enter a host IP address.
By default, the IP address of the PC from where you are running NAPT
Manager will be taken as host IP address. To add a NAPT entry for another
PC you have to change the proposed IP address.
•
Manually add a static NAPT entry, click the Advanced tab. Select a protocol
in the Protocol list and enter Port and Host IP address in the appropriate
fields.
By default, the IP address of the PC from where you are running NAPT
Manager will be taken as host IP address. To add a NAPT entry for another
PC you have to change the proposed IP address.
•
Specify a default server IP address, click the Default inbound host tab. Enter
the new IP address in the Host IP address field.
Click Set to add your entry to the list.
5
If all required entries are added click Next to save the new entries.
E-SIT-CTC-20030306-0004 v2.0
Advertisement
Table of Contents
