Routed PPPoE
E-SIT-CTC-20030306-0004 v2.0
Click this link to display the Routed Point-to-Point Protocol over Ethernet (PPPoE)
page.
This page allows you to view/configure the SpeedTouch™610 Routed PPPoE connec-
tion entries
Per selected Routed PPPoE you can:
•
Configure some advanced settings, if applicable:
The destination of an Routed PPPoE should always be a Routed Ethernet interface
or eth0 (PPPoE on the LAN)
•
Configure the Routing parameters, if applicable:
3 The SpeedTouch™610 Web Interface
43