Table of Contents
Advertisement
1 SpeedTouch™610 Installation
14
7
The Setup wizard will continue to search for the SpeedTouch™610 on the net-
work. The following window shows the detection progress:
8
The setup wizard should find your SpeedTouch™610 device on the local network.
This is indicated by following window:
In case more than one SpeedTouch™ device is found, a listing is provided from
which you can select your SpeedTouch™610.
Note
If the wizard does not find a SpeedTouch™610 on the network, an
error window appears. In this case check:
•
Whether the SpeedTouch™610 is turned on and fully initialized.
•
Whether your PC is correctly connected to the Speed-
Touch™610.
•
Whether no dedicated firewall device or a router is placed
between your PC and the SpeedTouch™610 and whether no
personal firewall software is running on your PC.
•
Whether TCP/IP is correctly installed on your PC, and whether
your PC is configured with a valid IP address as DHCP client, or
via automatic IP configuration.
To repeat search for the SpeedTouch™610, click Back and proceed
with step
9
To continue with the configuration of your SpeedTouch™610 and your PC, pro-
ceed with the configuration procedure described below.
7
of this procedure.
E-SIT-CTC-20030306-0004 v2.0
Advertisement
Table of Contents
