THOMSON Speedtouch 600 Series Orientation Manual page 50

Business dsl routers
Table of Contents

Advertisement

3 The SpeedTouch™610 Web Interface
Classical IP
Bridged Ethernet
Relayed PPPoA
46
Click this link to display Classical IP (CIP) over ATM page.
This page allows you to:
View/configure the SpeedTouch™610 IP interface connection entries:
View/configure the SpeedTouch™610 CIP connection entries:
Click this link to display the Bridged Ethernet page. Bridged Ethernet is commonly
known as IEEE802.1D Transparent Bridging or RFC1483/Bridged.
The Bridged Ethernet Packet Service is also used for the Bridged PPP over Ethernet
(PPPoE) Packet Service.
This page allows you to:
View/configure the SpeedTouch™610 Bridged Ethernet connection entries:
For more information, see the application notes "The SpeedTouch™ Bridged Ethernet
Packet Service" and "The SpeedTouch™ Bridged PPPoE Packet Service".
Click this link to display the Relayed PPPoA page. Relayed PPPoA is often referred to as
PPPoA-to-PPTP Relaying or PPPoA/Point-to-Point Tunnelling Protocol (PPPoA/PPTP).
This page allows you to:
View the current active SpeedTouch™610 Relayed PPPoA connection sessions:
E-SIT-CTC-20030306-0004 v2.0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Speedtouch 610

Table of Contents