Advanced Tasks Links - THOMSON Speedtouch 600 Series Orientation Manual

3.7 Advanced Tasks Links

CLI
E-SIT-CTC-20030306-0004 v2.0
Click this link to display the SpeedTouch™ Command Line Interface (CLI) page:
The CLI is meant for in depth configuration of the SpeedTouch™610, giving full control
on all configurational aspects of the device.
The web based CLI provides the same functionality as the native Command Line Inter-
face, available through a Telnet session to the SpeedTouch™610, or via the serial
Console interface.
All CLI groups and commands are placed in a menu. You can open a group by clicking
the mark next to a group name, or clicking the group name.
Clicking on a command name will execute it. Commands without parameters are indi-
cated with and are executed immediately. Commands which require additional
parameters are indicated with
Apply to execute the command.
For more information, see
Note To access the web based CLI pages:
• You need at least Microsoft's Internet Explorer 4.0, or at least
Netscape's Communicator 4.06, or equivalent, both supporting Javas-
cript.
•
You need to install Microsoft Virtual Machine if your computer runs
Microsoft Windows XP.
For more information, see the application note "The SpeedTouch™ Operation and
Maintenance".
3 The SpeedTouch™610 Web Interface
. After you configured all parameters, simply click
"4.1 Native Command Line Interface Access" on page 62.
55