Zoom Rooms - Crestron TSW-560 Supplemental Manual

The following Control System settings can be configured:
•
•
•
•
•
•

Zoom Rooms

Click the Zoom Rooms tab to view and modify the status of the touch screen display.
Options are the user project or Zoom Room Mode. The user project is the default setting;
Zoom Room Mode is disabled.
NOTE:
is 2.001.0020.001.
Settings – Zoom Rooms
Supplemental Guide – DOC. 7927F
Encrypt Connection: Turns setting an encrypted connection between a control
system and the touch screen on or off (Click the Encrypt Connection button to
toggle between enabling and disabling an encrypted connection to the control
system.)
Control System Username: If Encrypt Connection is turned on, sets a username
for accessing the encrypted connection to the control system
Control System Password: If Encrypt Connection is turned on, sets a password
for accessing the encrypted connection to the control system
Confirm Password: Confirms the password entered in the Password field
IP ID: Sets the IP ID used to connect the touch screen to the control system's IP
table
IP Address/Hostname: Sets the IP address of the control system
The minimum firmware version required for the touch screen support of this feature
TSW-560/TSW-760/TSW-1060: 5", 7", and 10.1" Touch Screens • 41