Web Configuration - Crestron TS-70 Series Product Manual

Web Configuration

The touch screen may be monitored and configured using the included web configuration
interface. The configuration interface is accessible from a web browser if the touch screen IP
address is known.
The web configuration interface is also accessible through the XiO Cloud® service. For more
information, refer to
To access the configuration interface:
1. Use the Device Discovery tool in Crestron Toolbox™ software to discover the touch screen
and its IP address on the network.
2. Open a web browser.
3. Enter the touch screen IP address into the browser URL field. The configuration interface
is displayed (TS-1070 shown).
NOTE: If authentication is enabled for the touch screen, an administrator username
and password must be entered prior to accessing the web configuration interface. For
more information on configuring authentication settings, refer to
page 141).
Web Configuration Interface
The configuration interface provides the following tabs:
Status: Used to monitor touch screen status
l
Settings: Used to configure touch screen settings
l
116 • TS-70 Series
Connect to XiO Cloud Service (on page 156).
Authentication (on
Product Manual — Doc. 8555F