Crestron TSW-560 Supplemental Manual page 46

NOTE:
Page Flip. Click OK on the pop-up window to begin the reboot.
The following Zoom Rooms settings can be configured:
•
•
•
•
After enabling Zoom Room Mode for the first time, the touch screen provides a means to
connect to the Zoom Rooms PC. Obtain Zoom account login information from the user's IT
(Information Technology) department.
42 • TSW-560/TSW-760/TSW-1060: 5", 7", and 10.1" Touch Screens
A device reboot is required after enabling Zoom Room Mode and Zoom Room
Zoom Room Mode: Enables or disables Zoom Room Mode on the touch screen
Zoom Room Page Flip: Enables or disables the user's ability to toggle between
the Zoom Room App and the user project
Time Out Control: Enables or disables an automatic page flip to either the Zoom
Room App or the user project after a specified flip back time (Choose one of three
settings.)
Disabled: Disables the automatic page flip
o
Enable Project Flip: Enables the automatic page flip to the user project until
o
the home button (second hard key from top right) is pressed
Enable Zoom Flip: Enables the automatic page flip to the Zoom Room App
o
until the home button (second hard key from top right) is pressed
Flip Back Time: Selects the time (in minutes) for enabling the automatic page flip
There are two ways to access the Zoom account. Tap the upper left corner (Sign In
or Pairing) to toggle between the options.
a. Enter the pairing code (supplied by IT).
Supplemental Guide – DOC. 7927F