Download Print this page
Crestron TSW-570P Getting Started

Crestron TSW-570P Getting Started

5 in. wall mount touch screen, portrait
Hide thumbs Also See for TSW-570P:

Advertisement

Quick Links

TSW-570P
5 in. Wall Mount Touch Screen, Portrait
Getting Started
Scan the QR code to view the Quick Start Guide.
www.crestron.com/docs/8683
For additional information on the Crestron® TSW-570P, visit
www.crestron.com/model/6510838
Certification and Compliance
Regulatory Model: M201923001
Federal Communications Commission (FCC) Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is
subject to the following conditions:
(1) This device may not cause harmful interference and (2) this device
must accept any interference received, including interference that
may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
l
Increase the separation between the equipment and receiver.
l
Connect the equipment into an outlet on a circuit different from
l
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
l
Industry Canada (IC) Compliance Statement
CAN ICES-3 (B)/NMB-3(B)
As of the date of manufacture, the product has been tested and
found to comply with specifications for CE marking.
こ の装置は、 ク ラ ス B情報技術装置です。 こ の装置は、 家庭環境で使用 する こ と を 目的
と し て いま す力く こ の装置がラ ジオ やテ レ ビ ジョ ン 受信機に近接し て 使用さ れる と 、 受信障
害を 引き 起こ すこ と があり ま す。取扱説明書に 従っ て 正し い取り 扱いを し て 下さ い。
This is a class B product based on the standard of the VCCI Council.
If this is used near a radio or television receiver in a domestic
environment, it may cause radio interference. Install and use the
equipment according to the instruction manual.
IMPORTANT NOTE: To comply with FCC RF exposure compliance
requirements, the antenna used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all
persons and must not be co-located or operating in conjunction with
any other antenna or transmitter.
REMARQUE IMPORTANTE: Pour être conforme aux exigences de
conformité d'ISED CANADA et de la FCC en matière d'exposition aux
radiofréquences, l'antenne utilisée pour cet émetteur doit être
installée de manière à assurer une distance de séparation d'au moins
20 cm de toutes les personnes. toute autre antenne ou émetteur.
ISED Canada: This device contains licence-exempt transmitter
(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada's licence-exempt RSS(s). Operation is subject
to the following two conditions: 1. This device may not cause
interference. 2. This device must accept any interference, including
interference that may cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent
appareil est conforme aux CNR d'Innovation, Sciences et
Développement économique Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : 1. L'appareil ne doit pas produire de brouillage; 2.
L'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
The device may contain radios capable of transmitting in the
5150–5350 MHz frequency range (such as 5G Wi-Fi® networks). This
frequency is restricted to indoor use only.
The Waste Electrical & Electronic Equipment (WEEE) directive
marking on a product indicates that it should not be disposed of with
general waste. Instead, you are encouraged to reuse or recycle the
product in accordance with Directive 2012/19/EU of the European
Union. Proper disposal of this product will help prevent potential
negative effects on the environment and human health, which could
otherwise be caused by inappropriate waste handling. Penalties may
be applicable for incorrect disposal of this waste, in accordance with
your national legislation. For information about recycling this
product, please contact your household waste disposal service, your
original distributor, or Crestron.
Product Information - 8684A
(2055434)
02.20

Advertisement

loading

Summary of Contents for Crestron TSW-570P

  • Page 1 This is a class B product based on the standard of the VCCI Council. be applicable for incorrect disposal of this waste, in accordance with For additional information on the Crestron® TSW-570P, visit If this is used near a radio or television receiver in a domestic your national legislation.
  • Page 2 Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. ©2020 Crestron Electronics, Inc.