Upload User Project; Status - Crestron TSW-560 Supplemental Manual

Upload User Project

Click Upload User Project to upload a custom user project to the touch screen. A Project
Upload pop-up window opens for uploading the user project.
Project Upload Window
Use the following procedure to upload a custom user project through the web configuration
interface:
Click the x button to close the Project Upload window at any time during the upgrade
process. Clicking the x button before the project .vtz file is uploaded to the touch screen
cancels the upgrade.

Status

Click the Status tab on the top left of the configuration interface to display selections for
viewing the status of device settings, network settings, and the control system connection.
Status Tab Selections
Each selection is described in the sections that follow.
22 • TSW-560/TSW-760/TSW-1060: 5", 7", and 10.1" Touch Screens
Click Browse, and then navigate to the project .vtz file on the host computer.
Select the project .vtz file, and then click Open.
Click Load to load the project .vtz file to the touch screen. The progress of the
upload is shown in the pop-up window.
Once the touch screen has completed the project upload, click OK.
Supplemental Guide – DOC. 7927F