Removing The Top Panel And Fan Panel - Jenn-Air W11356996 Service Manual

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Complete the preparation steps
Disassembling the Coffee System", prior to performing the
following steps.
2. Remove the screws from the upper part of the top panel.
3. Remove the screw located on the right side of the coffee
system as shown below.

Removing the Top Panel and Fan Panel

1-10 from "Before
4. Remove the two screws securing the fan assembly to the
front panel. Pull out fan assembly and see the step 5.
5. Disconnect the wire harness.
JennAir Built-in Coffee System
COMPONENT ACCESS
n
4-9