Removing the Coffee Heater and Mechanical Valve
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Complete the steps
1-5
Fan Panel".
2. Complete the steps
1-3
Side Panel", prior to performing the following steps.
3. Remove the wires connected to the upper micro-switch.
Unclip the hose coming from the pump/dumper.
from "Removing the Top Panel and
from "Removing the Back Panel and
4. Remove four bolts (one at each corner). Take care as nuts are
on the underside of the assembly and may fall inside the unit.
5. Lift up and remove the generator and mechanical valve
assembly.
JennAir Built-in Coffee System
COMPONENT ACCESS
n
4-21