Removing The 2-Way Solenoid Valves - Jenn-Air W11356996 Service Manual

COMPONENT ACCESS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
2-Way Solenoid Valves (Hot Water)
1. Complete the steps 1-5
Fan Panel".
2. Complete the steps 1-3
Side Panel", prior to performing the following steps.
3. Remove the fixing clips of the two hoses of solenoid valve.
Disconnect hoses and power supply cables from the 2-way
solenoid valves (hot water).
2-Way Solenoid Valve (Hot Water)
4. Remove the two screws which are securing the body of 2-way
solenoid valve (hot water) to the support.
2-Way Solenoid Valve (Hot Water)
5. Remove 2-way solenoid valves (hot water).
n
4-24 JennAir Built-in Coffee System

Removing the 2-Way Solenoid Valves

from "Removing the Top Panel and
from "Removing the Back Panel and
2-Way Solenoid Valves (Steam)
1. Complete the steps
1-5
Fan Panel".
2. Complete the steps
1-3
Side Panel", prior to performing the following steps.
3. Remove the fixing clips of the two hoses of solenoid valve.
Disconnect hoses and power supply cables from the 2-way
solenoid valves (steam).
2-Way Solenoid Valve (Steam)
4. Remove the two screws which are securing the body of 2-way
solenoid valve (steam) to the support.
2-Way Solenoid Valve (Steam)
5. Remove 2-way solenoid valves (steam).
from "Removing the Top Panel and
from "Removing the Back Panel and