Removing The Main Power Board - Jenn-Air W11356996 Service Manual

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Complete the steps 1-3
Side Panel", prior to performing the following steps.
2. Disconnect all harnesses. If necessary, disconnect label
terminals and connectors for ease of re-installation.

Removing the Main Power Board

from "Removing the Back Panel and
3. To remove main board, remove the five screws securing PCB
to chassis.
JennAir Built-in Coffee System
COMPONENT ACCESS
n
4-11