Removing The Back Panel And Side Panel - Jenn-Air W11356996 Service Manual

COMPONENT ACCESS

Removing the Back Panel and Side Panel

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Complete the preparation steps
Disassembling the Coffee System", prior to performing the
following steps.
2. Remove the screw located above the power cord connection
and on the right edge of the back panel.
3. Remove the screws located on the right edge of the back
panel. Lift up the back panel.
n
4-10 JennAir Built-in Coffee System
1-10 from "Before
4. Remove the four screws on each side of coffee system which
are securing the left and right side panels.