Removing The Front Panel And Front Door - Jenn-Air W11356996 Service Manual

Removing the Front Panel and Front Door

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Complete the steps 1-5
Fan Panel".
2. Complete the steps 1-4
Side Panel".
3. Complete the steps
1-5
Board".
Front Panel
4. Remove the front panel.
IMPORTANT: The display assembly is not a serviceable part.
To replace the display, the entire front panel assembly must
be replaced.
NOTE: The front panel can be easily removed once the side
panels and fan have been removed.
5. Disconnect the cables from the LED and Fan Board before
removing the front panel.
from "Removing the Top Panel and
from "Removing the Back Panel and
from "Removing the LED and Fan
Front Door Removal
6. With the help of a clamp, remove the metallic rod which is
holding the front door.
JennAir Built-in Coffee System
COMPONENT ACCESS
n
4-23