Control Panel - Jenn-Air W11356996 Service Manual

DIAGNOSTICS & TROUBLESHOOTING
B
A
K
J
I
To Enter Service Mode:
1. With the machine in stand-by (plugged in with the main
switch on, but the machine OFF), open the service door.
2. Press the four corners of the display simultaneously until the
Service Menu appears.
3. The possible options will be displayed.
LOAD
TEST
MODE
RESET
ENCODER
4. Close the door and choose one of the options by pressing and
holding the relative display area.
n
2-2 JennAir Built-in Coffee System
For Service Technician Use Only

Control Panel

C
MY
User 2
Espresso
A. Menu to customize beverages settings
B. Appliance settings menu
C. Selected strength
D. Clock
E. Selected size
F. Strength selection
TEST
DISPLAY
ELECTRIC
TEST
MODE
ENERGY
SAVING
D E
00:00
MY
MY
Co ee Cappuccino
G. Size selection
H. Right scroll arrow
I. Selectable drinks (press on the scrolling
arrows to see all the drinks)
J. Left scroll arrow
K. Customizable profiles
Display
Load Test
Mode
Reset Encoder Resets the value recorded as the top position
Test Display
Electric Test
Energy Saving Energy saving feature that will reduce the
KEY 1
KEY 2
KEY 4
F G
Strength
Size
H
Latte
macchiato
Function
Tests all the functional parts by pressing the
related display area. See page 2-4.
for the Diverter Assembly. If a mechanical or
electrical component in the Diverter Assembly
is replaced (for example, the transmission kit,
switches or the mechanical valve) you will need
to reset the encoder. If you change the control
board, the machine will reset it automatically.
Tests all the areas of the display. See chart below
for 'KEY' areas on display ('KEY 1', KEY 2', etc.).
Used only by production for final tests.
temperature for the coffee and steam heaters
in standby mode reducing energy consumption
when machine is ON but not used. When
delivering a beverage, there is no difference.
This setting can also be changed by the user on
the user interface.
KEY 0
KEY 5 KEY 6 KEY 7
KEY 12
KEY 11
KEY 8 KEY 9