Removing The Led And Fan Board - Jenn-Air W11356996 Service Manual

COMPONENT ACCESS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Complete the steps 1-5
Fan Panel".
2. Complete the steps 1-4
Side Panel".
3. Remove the two screws securing the plastic cover for the LED
and Fan board. Remove the plastic cover.
n
4-22 JennAir Built-in Coffee System

Removing the LED and Fan Board

from "Removing the Top Panel and
from "Removing the Back Panel and
4. Disconnect the harnesses from the LED and Fan board.
5. Remove the two screws from the PCB in order to disconnect
the board from coffee system.