Removing The Flow Meter - Jenn-Air W11356996 Service Manual

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Complete the steps 1-3
Side Panel", prior to performing the following steps.
2. Lift up the flow meter with a finger in order to unclip it from
the bottom support.

Removing the Flow Meter

from "Removing the Back Panel and
3. Remove the two water tubes from the flow meter.
4. Disconnect the flow meter cable from the control board
terminal "J7."
J8
N
L
F4 F3 F2 F1
JennAir Built-in Coffee System
COMPONENT ACCESS
Flow Meter
Connection
J7
J2
Main
Board
L L L
n
4-15