6Yy Errors - Lexmark MB2236 Service Manual

Action
Step 4
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Motor tests
b
Select Motor (transport drive).
Does the motor run?
Step 5
a
Reseat the motor cable at both ends.
b
Make sure that the motor gear is properly aligned with the drive
gears.
c
Check the motor for proper installation and damage.
Is the motor properly installed and free of damage?
Step 6
Check the cables for proper connection and damage.
Are the cables properly connected and free of damage?
Step 7
Replace the damaged cable.
Does the problem remain?
Step 8
a
Reseat all the cables on the controller board.
b
Check if the controller board LED lights up.
c
Check the controller board for proper installation and damage.
Is the controller board properly installed and free of damage?
Step 9
Replace the controller board. See
page 228.
Does the problem remain?

6yy errors

6yy error messages
Error code Description
600.01 Toner tally never received.
600.02 The printhead is not ready to image.
"Controller board removal" on
Diagnostics and troubleshooting
150
Yes
Go to step 6.
Go to step 6.
Go to step 8.
Go to step 8.
Contact the next
level of support.
Contact the next
level of support.
Action
See "Printer declared jam service check" on
page 152.
See "Printhead error 1 service check" on
page 153.
3400-48x
No
Go to step 5.
Contact the next
level of support.
Go to step 7.
The problem is
solved.
Go to step 9.
The problem is
solved.