140 Errors - Lexmark MB2236 Service Manual

Action
Step 7
Replace the controller board. See
page 228.
Does the problem remain?

140 errors

140 error messages
Error code Description
140.82 Motor (transport drive) failure.
Motor (transport drive) service check
Action
Step 1
a
Make sure that the tray insert is properly inserted.
b
Make sure that the paper type and size settings match the
paper type and size set on the tray.
c
Make sure that the duplex unit is properly inserted.
d
Make sure that the paper size setting in the duplex unit matches
the printer setting.
e
Make sure that the front and rear doors are fully closed.
f
Make sure that the output bin is free from obstructions.
Does the problem remain?
Step 2
a
Remove the imaging unit and toner cartridge, and then make
sure that the paper path is free of jams and obstructions.
b
Clear all rollers of dirt and contamination.
Does the problem remain?
Step 3
a
Perform a POR.
b
Enter the Diagnostics menu, and then navigate to:
Input tray quick print > Tray 1 > Single
Does the problem remain?
"Controller board removal" on
Diagnostics and troubleshooting
149
Yes
Contact the next
level of support.
Action
See "Motor (transport drive) service check" on
page 149.
Yes
Go to step 2.
Go to step 3.
Go to step 4.
3400-48x
No
The problem is
solved.
No
The problem is
solved.
The problem is
solved.
The problem is
solved.