232 Paper Jams - Lexmark MB2236 Service Manual

Action
Step 19
a
Enter the Diagnostics menu, and then navigate to:
Input tray quick print > Tray 1 > Single
b
Enter the Diagnostics menu, and then navigate to:
Input tray quick print > Duplex > Single
Does the problem remain?
Step 20
a
Make sure that the main drive is properly installed and free of
damage.
b
Make sure that the main drive gears are properly installed.
c
Make sure that the drive gears are in proper contact with the
gear they are driving.
Does the problem remain?
Step 21
Replace the main drive. See
Does the problem remain?
Step 22
a
Reseat all the cables on the controller board.
b
Check if the controller board LED lights up.
c
Check the controller board for proper installation and damage.
Is the controller board properly installed and free of damage?
Step 23
Replace the controller board. See
page 228.
Does the problem remain?

232 paper jams

232 paper jam messages
Error code Description
232.13 Paper fed from tray 1 never arrived at the
sensor (input sensor S3) during a duplex print
job.
232.15 Paper fed from tray 1 never cleared the sensor
(input sensor S3) during a duplex print job.
"Main drive removal" on page
"Controller board removal" on
Diagnostics and troubleshooting
113
Yes
Go to step 20.
Go to step 21.
Go to step 22.
234.
Contact the next
level of support.
Contact the next
level of support.
Action
See "Sensor (input sensor S3): Duplex failure
service check" on page 114.
3400-48x
No
The problem is
solved.
The problem is
solved.
The problem is
solved.
Go to step 23.
The problem is
solved.