Operation
4.19.4 Blow-out device
The blow-out device (1) is used in conjunction with the bundle clamp.
The blast pipe conveys the workpiece out of the sewing area.
Fig. 36: Blow-out device
①
(1) - Blow-out device
To switch on the blow-out device:
1. Switch on the blow-out device (1) in the menu item Machine parame-
ters, ( p. 134).
2. Set blowing mode ( p. 130).
Information
The blast pipe continues to blow until the light barrier used for stacker con-
trol is clear.
46
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017