Operation
4
The operating sequence consists of several different steps.
Fault-free operation is necessary in order to achieve a good sewing result.
4.1 Preparing the machine for operation
Complete the following steps in preparation of sewing before starting to
work:
• Inserting/changing the needle
• Threading the needle thread
• Inserting and winding on the hook thread
• Setting the thread tensions
4.2 Switching on the machine
Fig. 5: Switching on the machine
To switch on the machine:
1. Turn the main switch from position 0 to position I.
The machine starts up.
The control panel starts up.
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Operation
WARNING
Risk of injury from moving, cutting and sharp
parts!
Crushing, cutting and punctures are possible.
If possible, make preparations only when the
machine is switched off.
17