DURKOPP ADLER 745-35-10 S Operating Instructions Manual page 24

Fig. 10: Threading the needle thread (2)
(1) - Thread lever
(2) - Thread advancing device
(3) - Guide
(4) - Needle thread monitor
(5) - Guide
(6) - Hole
8. Insert the thread in a wavelike manner through the left holes (11) in
9. Insert the thread through the guide (10).
10. Feed the thread counterclockwise through the tensioner (9).
11. Feed the thread clockwise through the tensioner (8).
12. Insert the thread through the thread tensioning spring (7).
13. Insert the thread through the hole (6) in the mounting plate.
14. Insert the thread through the upper hole in the thread lever (1).
15. Insert the thread through the thread advancing device (2).
16. Insert the thread through the guide (3).
17. Feed the thread through the needle thread monitor (4).
18. Insert the thread through the guide (5).
19. Feed the thread into the left needle.
Right needle thread
To thread the right needle thread:
1. Swivel the folding station to the side ( p. 18).
2. Fit the thread reel on the thread reel holder.
3. Feed the thread from the thread reel through the hole (2) of the thread
4. Insert the thread through the guide (1).
22
①
②
③
④
⑤
the mounting plate, as shown above.
reel holder.
⑥
(7) - Thread tensioning spring
(8) - Voltage
(9) - Voltage
(10) - Guide
(11) - Holes
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Operation
⑪
⑩
⑨
⑧
⑦