DURKOPP ADLER 745-35-10 S Operating Instructions Manual page 243

Troubleshooting
Error code Symbol
8411 Information
8414 Information
8415 Information
Error code 9000-9999: Error messages displays
9000
9001
9002
9003
9007
9013
9014
9015
9501
9601
9604
9605
9700
9701
9702
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Meaning
Machine is checking new program. This process can take up to 30 sec.
Update completed!
Continue with old software. (If you use the old software, we cannot
guarantee that all functions will be available to the full extent.)
Reminder to execute the
reference run after switching on
Corner knife station swiveled out
during sewing
Folding station swiveled out
during sewing
Wrong needle position
Test the loading process
Tape missing
Position of transport clamp
doesn't match the installed die
Wrong adjustment of flap
scanning in the seam program
Test step by step
Pedal was pressed backwards
during sewing
Light barrier for sewing material
removal not active
Transport clamp moves
Folder not up
Folder not down
Folder not vertical
Remedial action
Press the left pedal backwards
Check/set fastening of corner knife
station
Check/set fastening of folding
station
Manually turn the handwheel to the
upper position of the thread lever
(top dead center)
Resuming the process after pushing
the start pedal
Insert tape  p. 42
Correct position of transport clamp
in the seam parameters
 p. 125
Correct seam program
Use pedal for progress
Press pedal again
Set light barrier for sewing material
removal
Correct folder setting
Correct folder setting
Correct folder setting
241