DURKOPP ADLER 745-35-10 S Operating Instructions Manual page 104

To create a seam program:
1. Press the desired button.
 The user interface for setting the desired item is displayed.
 The display switches to Securement seam beginning left
Fig. 85: Set securement seam beginning left needle
Symbols
102
Set securement seam beginning left needle
needle.
Meaning
Select stitch condensing
• Set stitch length for stitch condensing at seam beginning
(0.5 - 3.5 mm)
• Set number of stitches for stitch condensing at seam
beginning (0 - 10)
Select single tack
• Set stitch length for single tack at seam beginning
(0.5 - 3.5 mm)
• Set number of stitches for single tack at seam beginning
(0 - 10)
Select double tack
• Set stitch length for double tack at seam beginning
(0.5 - 3.5 mm)
• Set number of stitches for double tack at seam beginning
(0 - 10)
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Programming