DURKOPP ADLER 745-35-10 S Operating Instructions Manual page 165

Programming
Testing step motor
 The display switches to Test step motor.
Fig. 135: Test step motor
To test the step motor:
1. Press the
 Reference run is carried out.
The following table lists the items that can be set in the Test step motor
menu.
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
CAUTION
Risk of injury from moving parts!
Crushing possible.
When you advance the transport clamp, the
transport clamp will start at the set speed.
Do NOT reach into the movement area of the
transport clamp.
Do not place any objects in the movement area of
the transport clamp.
button.
163