Procedure for establishing online operation via Ethernet
1. Installing the Ethernet interface in the PG/PC according to the manufacturer's
2. Setting the IP address in Windows XP.
3. Setting the online interface in STARTER.
4. Assigning the IP address and the name via the STARTER tool.
Setting the IP address in Windows XP
On your desktop, right-click "Network environment" -> Properties -> double-click on the
network card and choose -> Properties -> Internet Protocol (TCP/IP) -> Properties -> Enter
the IP addresses and the subnet mask.
Figure 2-3
Commissioning Manual
Commissioning Manual, (IH1), 01/2011, 6SL3097-4AF00-0BP1
specifications
The PG/PC is assigned a free IP address here (e.g. 169.254.11.1). The factory setting of
the internal Ethernet interface X127 of the Control Unit is 169.254.11.22.
Setting the IP address from the PG/PC
Commissioning
2.2 STARTER commissioning tool
57