Siemens SINAMICS S120 Commissioning Manual page 136

Commissioning
2.13 Commissioning linear motors (servo)
2. Enter motor data
Table 2- 20
Parameter
p0305
p0311
p0315
p0316
p0322
p0323
p0338
134
You can select a standard motor from the list of motors. You can enter the motor data for
third-party motors manually. The number of parallel primary sections (p0306) must be
entered.
Figure 2-34 STARTER screen, linear motor selection 1FN3
The following motor data must be entered for third-party motors:
Motor data
Description
Rated motor current
Motor rated velocity
Motor pole pair width
Motor force constant
Motor velocity, maximum
Maximum motor current
Motor limit current
Commissioning Manual, (IH1), 01/2011, 6SL3097-4AF00-0BP1
Comment
-
-
-
-
-
-
-
Commissioning Manual