Switch Module Specifications; Switch Module Serial Numbers; Switch Module Options; Schematics And Component Locators - Agilent Technologies 75000 C Series Service Manual

Switch Module
Specifications
Switch Module
Serial Numbers
Switch Module
Options
Schematics and
Component
Locators

Recommended Test Equipment

Instrument
Controller, GPIB
Mainframe
Command Module
Digital Multimeter
*
F = Functional Verification Tests, O = Operation Verification Tests, P = Performance Verification Tests, T = Troubleshooting
Chapter 1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Specifications are listed in Appendix A of the Agilent E1463A 32-Channel
Form C Switch Module User's Manual. These specifications are the
performance standards or limits against which the modules may be tested.
Devices covered by this manual are identified by a serial number prefix
listed on the title page. Agilent Technologies uses a two-part serial number
in the form XXXXAYYYYY, where XXXX is the serial prefix, A is the
country of origin (A=USA), and YYYYY is the serial suffix. The serial
number prefix identifies a series of identical instruments. The serial number
suffix is assigned sequentially to each instrument. The serial number plate is
located on the right-hand shield near the backplane connectors.
The Agilent E1463A comes standard with a terminal module consisting of
screw terminals. In addition, a terminal module with solder eye terminals is
available (Option A3G).
Component locators and schematics for the modules are packaged with this
manual. Clear plastic sleeves are included for storage.
Table 1-1 lists the test equipment recommended for testing and servicing the
module. Essential requirements for each piece of test equipment are
described in the Requirements column.
Table 1-1. Recommended Test Equipment
Requirements
GPIB compatibility as defined by IEEE
Standard 488-1988 and the identical
ANSI Standard MC1.1: SH1, AH1, T2,
TE0, L2, LE0, SR0, RL0, PP0, DC0,
DT0, and C1, 2, 3, 4, 5.
Compatible with switch module
Compatible with switch module
4-wire ohms
2-wire ohms (up to 1 GΩ )
Recommended Model
HP 9000 Series 300
or
IBM Compatible PC with
BASIC
Agilent E1401B/T or
Agilent E1421B
Agilent E1405A/B or
Agilent E1406A
Agilent 3458A or
Agilent 34401A
General Information 17
Use*
F,O,
P,T
F,O,
P,T
F,O,
P,T
O,P, T