Chapter 4. Service; Introduction; Repair Strategy; Equipment Required - Agilent Technologies 75000 C Series Service Manual

Introduction

WARNING

Repair Strategy

Equipment
Required

Service Aids

Chapter 4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
This chapter contains service information for the Agilent E1463A
Form C Switch Module, including troubleshooting techniques
and repair and maintenance guidelines.
Do not perform any of the service procedures shown unless
you are a qualified, service-trained technician, and have read
the WARNINGS and CAUTIONS in Chapter 1.
Agilent Technologies recommends component replacement for the
Agilent E1463A. Procedures in this chapter describe troubleshooting
techniques. Schematics and Component Locators are located at the back of
this manual. Component- level replaceable parts lists are contained in
Chapter 3, "Replaceable Parts." See Chapter 1, "General Information," for a
description of relay life factors.
Equipment required for the Agilent E1463A Form C Switch Module
troubleshooting and repair is listed in Table 1-1, "Recommended Test
Equipment." Any equipment that satisfies the requirements given in the
table may be substituted.
To avoid damage to the screw head slots, use a T8 Torx driver to remove
the front panel handles and a T10 Torx driver to remove the shields.
See Chapter 3, "Replaceable Parts," for descriptions and locations of
Agilent E1463A replaceable parts. Service notes, manual updates, and
service literature for the switch module may be available through Agilent
Technologies. For information, contact your nearest Agilent Technologies
Sales and Support Office.
Chapter 4
Service
Service 45