Attaching A Terminal Module To The Form C Switch - Agilent Technologies E1463A User's Manual And Scpi Programming Manual

Attaching a
Terminal Module to
the Form C Switch
1
Extend the extraction levers on the
terminal module.
Use small screwdriver
to release the two
extraction levers
2
3
Apply gentle pressure to attach
the terminal module to the
E1463A module.
4
Push in the extraction levers
to lock the terminal module
onto the E1463A module.
To remove the terminal module from the E1463A,
use a small screwdriver to release the two extraction
levers and push both levers out simultaneously
to free it from the Form C switch module.
22 Getting Started
Figure 1-12 gives guidelines to attach a terminal module to the Form C
switch.
Extraction Lever
Align the terminal module connectors
to the E1463A module connectors.
Figure 1-12. Attaching a Terminal Module to the Form C Switch
E1463A
Module
Extraction Lever
Extraction
Levers
Chapter 1